More Industries
Technical textiles, composites, aerospace interiors, leather goods and more: the same Lectra Vector cutters, and the same wear parts, run in many cutting rooms.
HomeMore Industries
One Cutter, Many Cutting Rooms
Fashion, automotive and furniture are where most Lectra Vector cutters run, but not all. The same machines cut technical, safety and leather materials every day, and they wear the same blades, bristle blocks and sharpening parts.
ready to quote
- 01Technical Textiles
Coated fabrics, nonwovens and filter media cut for industrial products.
PVC & PU coatedNonwovensFilter media - 02Composites
Glass, carbon and aramid fabrics cut into plies for wind, marine and sports parts.
Glass fiberCarbon fiberAramid - 03Aerospace Interiors
Seat covers, carpets and cabin trim cut to tight tolerances.
Seat fabricsCarpetLeather - 04Marine & Outdoor
Canopies, covers, tents and sails from heavy woven and coated fabrics.
CanvasCoated polyesterMesh - 05Protective & Medical
Protective clothing and medical textiles in single and multi-ply spreads.
AramidNonwovensLaminates - 06Leather Goods & Footwear
Bags, belts and shoe uppers cut from natural and synthetic leather.
Natural leatherPU leatherMicrofiber
Match the Part to the Material
Different materials wear a cutter in different places. Use this as a starting point, then send us your material and Lectra model and we confirm the exact parts.
| Material | What it does to the cutter | Parts to watch |
|---|---|---|
| Glass & carbon fabrics | Abrasive fibers wear blade edges and sharpening media quickly. | |
| Coated fabrics (PVC, PU) | The coating loads the blade and needs a clean, consistent edge. | |
| Nonwovens & filter media | Light, lofty layers need even vacuum hold to stay flat while cutting. | |
| Natural & synthetic leather | Tough single plies stress the knife drive and the drill tools. | |
| Foam & spacer fabrics | Thick spreads put a steady load on the knife drive. | |
| Aramid & protective fabrics | Cut-resistant fibers dull standard edges fast, so service intervals shorten. |
A general guide based on common wear patterns. Actual wear depends on ply height, cutting speed and maintenance.
Cutting Something Different?
If your cutting room runs a Lectra Vector, we can most likely supply its parts, whatever you cut on it. Tell us three things and we take it from there.
Tell Us Your Lectra Model. We'll Find the Part.
Send your part number, a photo or your full parts list. We confirm compatibility first, then reply with price, lead time and packing details.
Request Your Quote
Fields marked * are required. Photos and parts lists help us confirm faster.